[1]黄永智,张哲平,张传友,等.基于应变设计的热采井套管研究[J].石油管材与仪器,2020,6(03):34-37.[doi:10.19459/j.cnki.61-1500/te.2020.03.009]
 HUANG Yongzhi,ZHANG Zheping,ZHANG Chuanyou,et al.Research on Casing of Thermal Recovery Wells Based on Strain Design[J].Petroleum Tubular Goods & Instruments,2020,6(03):34-37.[doi:10.19459/j.cnki.61-1500/te.2020.03.009]
点击复制

基于应变设计的热采井套管研究
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
6
期数:
2020年03期
页码:
34-37
栏目:
试验研究
出版日期:
2020-06-20

文章信息/Info

Title:
Research on Casing of Thermal Recovery Wells Based on Strain Design
文章编号:
2096-0077(2020)03--0034-04
作者:
黄永智张哲平张传友杨腾飞
天津钢管制造有限公司 天津 300301
Author(s):
HUANG Yongzhi ZHANG Zheping ZHANG Chuanyou YANG Tengfei
Tianjin Pipe Corporation, Tianjin 300301, China
关键词:
热采井特殊扣应变设计无缝套管
Keywords:
thermal recovery well premium threaded connection strain design seamless casing
分类号:
TE925
DOI:
10.19459/j.cnki.61-1500/te.2020.03.009
文献标志码:
A
摘要:
热采井是采用热蒸汽或者火驱的方法提高地层原油温度、从而提高油井产量的一种油井。由于高温引起热采井用无缝套管的膨胀导致套管发生断裂、屈曲和泄漏等各种失效。基于应变理论设计的热采井用无缝套管,包括基于应变设计的管体材料和基于应变设计的特殊扣螺纹,更加适用于国内外热采井。
Abstract:
Thermal recovery well is a type of oil well that uses hot steam or fire flooding method to increase the temperature of the crude oil in formation to improve the production. Due to the high temperature, the expansion of the seamless casing in thermal recovery causes the casing pipe to break, buckle and leak. The seamless casing based on strain design, including pipe body material and premium threaded connection, is more suitable for thermal recovery wells at home and abroad.

参考文献/References:

[1] 刘栋梁,顾继俊.稠油热采技术现状及发展趋势[J]. 当代化工,2018,47(7):1445-1447.
[2] 崔孝秉,曹玲注,张宏,等.蒸汽热采井套管损坏机理研究[J]. 石油大学学报(自然科学版),1997,21(3):57-64.
[3] 刘光玺,李世平,叶俊华.稠油热采井套管损坏原因分析及治理[J]. 化工管理,2018,25(1):218-220.
[4] 盖平原,赵延茹,沈静范,等.胜利油田稠油热采工艺现状及发展方向[J]. 石油地质与工程,2008,22(6):49-51.
[5] 苏金洋,花志斌,薛自建.基于应变设计的变强度套管研究[J]. 石油矿场机械,2015,44(10):64-67.

相似文献/References:

[1]张守军,罗恩勇,杨尚谕,等.辽河油田火驱井套损综合分析及预防对策研究[J].石油管材与仪器,2016,(04):39.
 ZHANG Shoujun,LUO Enyong,YANG Shangyu,et al.Failure Analysis on Casing Damage of Combustion Drive Oil Well and Preventive Measures at Liaohe Oilfield[J].Petroleum Tubular Goods & Instruments,2016,(03):39.
[2]王航,杨尚谕,赵金兰,等.轴向约束非均匀载荷下蒸汽热采井套管屈曲研究[J].石油管材与仪器,2018,4(04):18.[doi:10.19459/j.cnki.61-1500/te.2018.04.005]
 WANG Hang,YANG Shangyu,ZHAO Jinlan,et al.Buckling of Casing under Axial Constraint and Nonuniform Load in Steam Thermal Well[J].Petroleum Tubular Goods & Instruments,2018,4(03):18.[doi:10.19459/j.cnki.61-1500/te.2018.04.005]
[3]王建军,杨尚谕,纪海涛,等.基于应变数值分析的稠油热采井套管优选[J].石油管材与仪器,2019,5(01):42.[doi:10.19459/j.cnki.61-1500/te.2019.01.010]
 WANG Jianjun,YANG Shangyu,JI Haitao,et al.Optimum Selection of Casing for Thermal Recovery of Heavy Oil Well Based on Strain Numerical Analysis[J].Petroleum Tubular Goods & Instruments,2019,5(03):42.[doi:10.19459/j.cnki.61-1500/te.2019.01.010]

备注/Memo

备注/Memo:
第一作者简介:黄永智,男,1987生,工程师,2013年毕业于河北理工大学冶金工程专业,获硕士学位,现主要从事油套管特殊扣研究工作。E-mail: huangyongzhi2007@126.com
更新日期/Last Update: 2020-06-25