[1]郝桂青,李健飞.智能化霍尔开关传感器高温筛选检测装置的设计[J].石油管材与仪器,2020,6(01):15-18.[doi:10.19459/j.cnki.61-1500/te.2020.01.004]
 HAO Guiqing,LI Jianfei.Design of High Temperature Intelligent Screening and Detecting Device for Hall Switch Sensor[J].Petroleum Tubular Goods & Instruments,2020,6(01):15-18.[doi:10.19459/j.cnki.61-1500/te.2020.01.004]
点击复制

智能化霍尔开关传感器高温筛选检测装置的设计
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
6
期数:
2020年01期
页码:
15-18
栏目:
开发设计
出版日期:
2020-02-25

文章信息/Info

Title:
Design of High Temperature Intelligent Screening and Detecting Device for Hall Switch Sensor
文章编号:
2096-0077(2020)01--0015-04
作者:
郝桂青李健飞
中海油田服务股份有限公司油田技术研究院 河北 三河 065201
Author(s):
HAO Guiqing LI Jianfei
Technical Center of China Oilfield Services Limited, Sanhe, Hebei 065201, China
关键词:
测井仪器液压动力直流无刷电动机霍尔传感器霍尔效应霍尔开关高温筛选
Keywords:
logging instrument hydraulic power DC brushless motor Hall sensor Hall effect Hall switch high temperature screening
分类号:
TM93
DOI:
10.19459/j.cnki.61-1500/te.2020.01.004
文献标志码:
A
摘要:
霍尔开关传感器是一种基于霍尔效应的磁传感器,常用于测井井下仪器的直流无刷电机中。由于井温和电机本身发热的影响,霍尔元件的环境温度有时会高达200 ℃,所以必须经过高温筛选才能应用到井下电机中。详细介绍了智能化筛选装置的工作原理、硬件及软件设计。经过多次实验验证,该筛选检测装置能够批量筛选,可实现实时记录与显示,且操作简单直观,具有筛选效率高、可靠性好、实用性强的特点,可以有效保证井下仪器中直流无刷电机高温性能。
Abstract:
Hall switch sensor is a magnetic sensor based on Hall effect, which is often used in DC brushless motor of logging tool. Because of the influence of well temperature and the heating of the motor itself, the ambient temperature of Hall element sometimes reaches 200 ℃, so it must be screened before being applied to the downhole motor. This paper introduces the working principle, hardware and software design of the intelligent screening device in detail. The experimental results showed that the screening detection device can achieve batch screening, realtime recording and display, and simple and intuitive operation. It has advantages of high screening efficiency, good reliability and strong practicability, and can effectively ensure the high temperature performance of DC brushless motor in downhole instruments.

参考文献/References:

[1] 郝桂青.测井仪器中几种电动机的性能比较与选型研究[J].石油仪器,2013,27(6):38-40.
[2] 何希才. 传感器及其应用电路[M].北京:化学工业出版社. 2001:100-108.
[3] Honeywell International Inc. Bipolar, Latching, or Unipolar Digital Halleffect Sensor ICs:SS400 Series,SS500 Series Datasheet [EB/OL].2016 Issue A.
[4] 张海燕.霍尔传感器特性应用研究[J].内蒙古科技与经济,2016,35(1):87,157.

相似文献/References:

[1]罗曦,李爱勇,孙向阳.三维感应测井仪斜刻度环设计和应用[J].石油管材与仪器,2015,(01):55.
 LUO Xi,LI Aiyong,SUN Xiangyang.Design and Application of Tilted Calibration Loop for 3D Induction Logging Tool[J].Petroleum Tubular Goods & Instruments,2015,(01):55.
[2]王东生,周晓妮,谢金亭,等.测井仪器虚焊故障分析原因及查找[J].石油管材与仪器,2015,(03):96.
 WANG Dongsheng,ZHOU Xiaoni,XIE Jinting,et al.Analysis of Causes and Looking for Pseudo Soldering Fault in Logging Instruments[J].Petroleum Tubular Goods & Instruments,2015,(01):96.
[3]阳建波.ECLIPS-5700系列测井仪器典型故障及排除方法[J].石油管材与仪器,2016,(04):98.
 YANG Jianbo.Typical Faults and Troubleshooting of ECLIPS-5700 Series Logging Tool[J].Petroleum Tubular Goods & Instruments,2016,(01):98.
[4]郭嗣杰,林坤.石油测井仪器外壳焊接工艺探究[J].石油管材与仪器,2016,(06):90.
 GUO Sijie,LIN Kun.Welding Procedure Exploration of Well Logging Tool Shell[J].Petroleum Tubular Goods & Instruments,2016,(01):90.
[5]史册,孙旭政,任锋.SDZ-3070连斜微球短节典型故障分析及解决方法[J].石油管材与仪器,2017,3(03):98.[doi:10.19459/j.cnki.61-1500/te.2017.03.025]
 SHI Ce,SUN Xuzheng,REN Feng.Typical Faults and Troubleshooting of SDZ-3070[J].Petroleum Tubular Goods & Instruments,2017,3(01):98.[doi:10.19459/j.cnki.61-1500/te.2017.03.025]
[6]王友春.PNN测井解释的影响因素分析及其应用[J].石油管材与仪器,2017,3(04):85.[doi:10.19459/j.cnki.61-1500/te.2017.04.022]
 WANG Youchun.Analysis of Influencing Factors of PNN Logging Interpretation and Its Application[J].Petroleum Tubular Goods & Instruments,2017,3(01):85.[doi:10.19459/j.cnki.61-1500/te.2017.04.022]
[7]邓茜珊.近水平DN 20仿仪器流道数值模拟分析[J].石油管材与仪器,2017,3(04):96.[doi:10.19459/j.cnki.61-1500/te.2017.04.025]
 DENG Xishan.Numerical Simulation of Nearhorizontal DN 20 Flow Channel in Simulation Instruments[J].Petroleum Tubular Goods & Instruments,2017,3(01):96.[doi:10.19459/j.cnki.61-1500/te.2017.04.025]
[8]王莹,杨帆,陆敬武,等.直驱式旋转井壁取心仪器电路设计[J].石油管材与仪器,2017,3(05):9.[doi:10.19459/j.cnki.61-1500/te.2017.05.003]
 WANG Ying,YANG Fan,LU Jingwu,et al.Circuit Design for Directdrive Extended Rotary Sidewall Coring Tools[J].Petroleum Tubular Goods & Instruments,2017,3(01):9.[doi:10.19459/j.cnki.61-1500/te.2017.05.003]
[9]张冀炜.电法类测井仪器刻度校验装置量值传递方法研究[J].石油管材与仪器,2018,4(01):88.[doi:10.19459/j.cnki.61-1500/te.2018.01.022]
 ZHNAG Jiwei.Research on Measurement Values Transmission for Calibration Devices of Electrical Logging Instruments[J].Petroleum Tubular Goods & Instruments,2018,4(01):88.[doi:10.19459/j.cnki.61-1500/te.2018.01.022]
[10]韩世林.阵列式探针产出剖面测井仪改进[J].石油管材与仪器,2019,5(01):64.[doi:10.19459/j.cnki.61-1500/te.2019.01.016]
 HAN Shilin.Improvement of Array Probe Output Profile Logging Instruments[J].Petroleum Tubular Goods & Instruments,2019,5(01):64.[doi:10.19459/j.cnki.61-1500/te.2019.01.016]

备注/Memo

备注/Memo:
基金项目:“十三五”国家科技重大专项“超低渗测试技术与装备”(编号:2016ZX05019-004) 第一作者简介:郝桂青,女,1972年生,高级工程师,1996年毕业于江汉石油学院电子仪器及测量技术专业,现主要从事电缆/随钻电缆地层测试器和井壁取心器的研发工作。E-mail:haogq@cosl.com.cn
更新日期/Last Update: 2020-02-25