[1]李瑞丰.生产测井组合仪在气井产出剖面评价中的应用[J].石油管材与仪器,2019,5(05):49-54.[doi:10.19459/j.cnki.61-1500/te.2019.05.012]
 LI Ruifeng.Application of Production Logging Tool in Evaluation of Gas Well Production Profile[J].Petroleum Tubular Goods & Instruments,2019,5(05):49-54.[doi:10.19459/j.cnki.61-1500/te.2019.05.012]
点击复制

生产测井组合仪在气井产出剖面评价中的应用
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期数:
2019年05期
页码:
49-54
栏目:
仪器设备与应用
出版日期:
2019-10-20

文章信息/Info

Title:
Application of Production Logging Tool in Evaluation of Gas Well Production Profile
文章编号:
2096-0077(2019)05--0049-06
作者:
李瑞丰
大庆油田有限责任公司测试技术服务分公司 黑龙江 大庆 163453
Author(s):
LI Ruifeng
Logging and Testing Services Company,Daqing Oilfield Co.Ltd., Daqing, Heilongjiang 163453, China
关键词:
生产测井组合仪测井产气剖面测井解释
Keywords:
production logging toollogginggas production profile logginginterpretation
分类号:
P631.8+1
DOI:
10.19459/j.cnki.61-1500/te.2019.05.012
文献标志码:
A
摘要:
生产测井组合仪主要用于常规产出和注入剖面测井,但在产气剖面分层测试中,深层气井、二氧化碳产出井等特殊井没有应用过生产测井组合仪。应用生产测井组合仪在深层气井、水平产气井进行了测试,通过综合解释不仅获得了产气剖面,还确定了各段主次产层,并且测试结果与实际试气结果对应较好,验证了生产测井组合仪在深层气井、水平产气井评价方面的可靠性;同时提出了应用生产测井组合仪评价二氧化碳产出井的方法,并将测试结果与氧活化测试结果及井口计量产量进行了对比,证明了应用生产测井组合仪评价二氧化碳产出井的可行性。拓展了生产测井组合仪
Abstract:
Production logging tool (PLT) is primarily used for conventional production and injection profile logging. But for gas production profile loggings, there are no such applications for some special wells such as deep gas wells and carbon dioxide output wells. Logging in the deep gas wells and horizontal gas wells with production logging tool not only can provide gas production profile but also can determine the primary and secondary reservoirs by comprehensive interpretation. The logging results and the actual testing results have a good correspondence, thus verifies the reliability of the production logging tools in the deep gas well and horizontal gas well production evaluations. Meanwhile a method of using production logging tools to evaluate carbon dioxide output wells is put forward. Comparing the logging results with the oxygen activation logging results and the metering yield at the wellhead proves the feasibility of using production logging tools to evaluate the carbon dioxide output wells. Thus the application range of the PLT in gas well production profile tests can be widened greatly.

参考文献/References:

[1] 谭廷栋.生产测井资料解释方法[M]. 北京 :石油工业出版社,1995:18-19.
[2] 肖承文,柳先远,张璋,等.音叉密度计在塔里木高压气田的应用[J].测井技术,2016,40(3):348-351.
[3] 姚亚彬,李震,苏波,等.音叉密度计在克拉2气田的应用[J].石油仪器,2014,28(2):31-33.
[4] 马鹏程.产气剖面测井技术在大庆油田的应用[J]. 石油仪器,2012,26(1):58-60,63.
[5] 刘晶晶.生产测井组合仪在气举找水中的应用[J]. 石油管材与仪器,2016,2(4):72-75.
[6] 张耀文,邹长春,顾伟康,等.PLT测井在苏丹穆格莱德油田的应用[J]. 国外测井技术,2008,29(3):21-23.
[7] 郭海敏,戴家才,陈科贵.生产测井原理与资料解释[M]. 北京:石油工业出版社,2007:209-212.
[8] 乔贺堂.生产测井原理及资料解释[M]. 北京:石油工业出版社,1992:108-111.
[9] 王海柱,沈忠厚,李根生,等.CO2气体物性参数精确计算方法研究[J]. 石油钻采工艺,2011,33(5):65-67.
[10] 徐海涛,肖勇,刘兴斌.氧活化测井技术在二氧化碳吸气剖面中的新应用[J]. 石油仪器,2011,25(5):42-45,48.
[11] 姜岳庆,王宁.能谱水流测井仪与生产测井组合仪组合测井的实现和应用[J]. 石油仪器,2011,25(5):25-27.
[12] 齐占奎.二氧化碳驱注入剖面氧活化测试技术和现场试验[J]. 石油管材与仪器,2016,2(6):63-66.
[13] 吴锡令.石油开发测井原理[M]. 北京 :高等教育出版社,2004:27-28.

相似文献/References:

[1]张文博,康松豪.IKZ-2型俄罗斯感应测井仪刻度方法研究[J].石油管材与仪器,2016,(01):53.
 ZHANG Wenbo,KANG Songhao.Study Calibration Method of Russian Induction Logging Tool of IKZ—2[J].Petroleum Tubular Goods & Instruments,2016,(05):53.
[2]杨陆,张光洲,高君恒,等.智能手机模拟测井深度信号的原理及实现[J].石油管材与仪器,2016,(06):31.
 YANG Lu,ZHANG Guangzhou,GAO Junheng,et al.Principle and Implementation of Simulating the Well Logging Depth Signal by Using Smartphone[J].Petroleum Tubular Goods & Instruments,2016,(05):31.
[3]朱立新.电动导入式打捞器的设计与应用[J].石油管材与仪器,2017,3(04):11.[doi:10.19459/j.cnki.61-1500/te.2017.04.003]
 ZHU Lixin.Design and Application of Electric Imported Type Fisher[J].Petroleum Tubular Goods & Instruments,2017,3(05):11.[doi:10.19459/j.cnki.61-1500/te.2017.04.003]
[4]张自成.基于热示踪的流量测量实验研究[J].石油管材与仪器,2017,3(04):41.[doi:10.19459/j.cnki.61-1500/te.2017.04.010]
 ZHANG Zicheng.Experimental Study on Flowrate Measurement Based on Thermal Tracing[J].Petroleum Tubular Goods & Instruments,2017,3(05):41.[doi:10.19459/j.cnki.61-1500/te.2017.04.010]
[5]张必波,孙刚,王振.一种伸缩测量装置的研制[J].石油管材与仪器,2017,3(06):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
 ZHANG Bibo,SUN Gang,WANG Zhen.Development of a Measuring Tool for Flex Quantity[J].Petroleum Tubular Goods & Instruments,2017,3(05):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
[6]朱立新.一种新型测井释放器的设计与应用[J].石油管材与仪器,2018,4(06):13.[doi:10.19459/j.cnki.61-1500/te.2018.06.004]
 ZHU Lixin.Design and Application of A New Type of Logging Releaser[J].Petroleum Tubular Goods & Instruments,2018,4(05):13.[doi:10.19459/j.cnki.61-1500/te.2018.06.004]
[7]滕学清,朱金智,吕拴录,等.哈13-12井套管在固井过程中断裂原因分析[J].石油管材与仪器,2019,5(04):70.[doi:10.19459/j.cnki.61-1500/te.2019.04.017]
 TENG Xueqing,ZHU Jinzhi,LYU Shuanlu,et al.Cause Analysis on Casing Fracture During Cementation in Well HA13-12[J].Petroleum Tubular Goods & Instruments,2019,5(05):70.[doi:10.19459/j.cnki.61-1500/te.2019.04.017]
[8]刘书涛,孙旭政.BDS连续测斜仪原理及常见故障分析[J].石油管材与仪器,2019,5(05):98.[doi:10.19459/j.cnki.61-1500/te.2019.05.021]
 LIU Shutao,SUN Xuzheng.Instrument Principle and Common Fault Analysis of BDS Continuous Inclinometer[J].Petroleum Tubular Goods & Instruments,2019,5(05):98.[doi:10.19459/j.cnki.61-1500/te.2019.05.021]

备注/Memo

备注/Memo:
第一作者简介:李瑞丰,男,1971年生,高级工程师,1995年大庆石油学院测井专业毕业,现主要从事测井资料解释工作。E-mail:dltslirf@petrochina.com.cn
更新日期/Last Update: 2019-10-25