[1]孙鹏.葡萄花油田水平井试油仪器及工艺优化研究[J].石油管材与仪器,2019,5(03):73-75.[doi:10.19459/j.cnki.61-1500/te.2019.03.018]
 SUN Peng.Study on the Testing Instrument and Process Optimization of Horizontal Well in Putaohua Oilfield[J].Petroleum Tubular Goods & Instruments,2019,5(03):73-75.[doi:10.19459/j.cnki.61-1500/te.2019.03.018]
点击复制

葡萄花油田水平井试油仪器及工艺优化研究
分享到:

《石油管材与仪器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期数:
2019年03期
页码:
73-75
栏目:
仪器设备与应用
出版日期:
2019-06-20

文章信息/Info

Title:
Study on the Testing Instrument and Process Optimization of Horizontal Well in Putaohua Oilfield
文章编号:
2096-0077(2019)03--0073-03
作者:
孙鹏
大庆油田试油试采分公司试采大队 黑龙江 大庆 163100
Author(s):
SUN Peng
Daqing Oil Field Test and Production Branch Test Production Team Engineering Group, Daqing, Heilongjiang 163100, China
关键词:
葡萄花油田水平井低孔低渗试油仪器联作试油
Keywords:
Putaohua Oilfield horizontal well low porosity and low permeability oil test instrument combined production test
分类号:
TE353
DOI:
10.19459/j.cnki.61-1500/te.2019.03.018
文献标志码:
A
摘要:
葡萄花油田是大庆油田外围的主力产油区块,受目前低油价的影响,水平井开发已经逐渐成为区域内的主要开发方式,但葡萄花油田低孔低渗特征明显,常对水平井试油工作产生较大影响,通过分析葡萄花油田现阶段试油工艺,提出了试油过程中需要克服的各种问题,同时结合葡萄花油田的地质情况,从水平井试油仪器和工艺出发,研究了区域内试油试采的配套技术,总结了水平井试油的工艺措施,并提出低孔低渗储层联作试油的方法,优化了水平井试油技术,通过实际应用,完成了射孔、测试和抽汲排液的三道工序,单口井平均用时较少,平均时间可达5天,大大缩减了
Abstract:
Putaohua Oilfield is the main oil production block in the periphery of Daqing Oilfield. Under the influence of low oil price at present, horizontal well development has gradually become the main development mode in the region, but the characteristics of low porosity and low permeability in Putaohua Oilfield are obvious. It often has a great influence on the horizontal well testing work. By analyzing the present oil testing technology of Puhua Oilfield, various problems need to be overcome in the oil testing process are put forward. At the same time, combined with the geological conditions of the Putaohua Oilfield, On the basis of horizontal well testing instrument and technology, this paper studies the matching technology of regional oil testing and production test, summarizes the technical measures of horizontal well testing, puts forward the method of combining oil testing with low porosity and low permeability reservoir, and optimizes the horizontal well testing technology. Through practical application, the three processes of perforation, testing and swabbing are completed. The average time of a single well is less and the average time can reach 5 days, which greatly reduces the time taken up at the wellhead, and the facts have proved that the time taken up by the well head has been greatly reduced. This method of singlelayer oil test and combined production can provide technical support for the development of Putaohua oil field.

参考文献/References:

[1] 邱金平,张明友,才博,等.超深高温高压含硫化氢气藏高效试油技术新进展[J]. 钻采工艺,2018,41(2):49-50,94.
[2] 王景恒.基于电缆地层测试器的产能评价及试油优化[J]. 石油工业技术监督,2018,34(3):60-62.
[3] 于昊. 致密油水平井试油工艺及产能评价方法研究[D]. 东北石油大学,2017.
[4] 魏炜.关于对井下试油压裂新工艺的探讨[J]. 石化技术,2017,24(12):233.
[5] 毛宇. 大庆油田试油现场施工安全管理与控制研究[D]. 吉林大学,2017.
[6] 王俊威.胜利油田小套管完井水平井试油技术优化设计与应用[J]. 油气井测试,2017,26(5):73-74,78.
[7] 郝增贤,闫桂芳,王伟秋,等.环保试油排液装置现场应用[J]. 油气井测试,2017,26(1):61-62,78.
[8] 郭秀庭,葛党科,孙涛,等.海上低渗储层试油井技术分析与实践[J]. 油气井测试,2017,26(4):41-44,77.
[9] 孙海芳,刘飞,王志敏.高温高压气井试油完井一体化工艺技术[J]. 钻采工艺,2017,40(4):36-39,3.
[10] 齐宗江,郭建,毛文轩.水平井桥塞分层试油工艺研究[J]. 化工管理,2017,(12):111.

相似文献/References:

[1]马认琦,张玺亮,史红娟,等.井下牵引器的技术现状及发展趋势[J].石油管材与仪器,2015,(04):8.
 MA Renqi,ZHANG Xiliang,SHI Hongjuan,et al.Technical Status and Development Trends of Downhole Tractors for Horizontal Wells[J].Petroleum Tubular Goods & Instruments,2015,(03):8.
[2]姜岳庆.测井资料在检查水平井套管破漏中的组合应用[J].石油管材与仪器,2016,(01):80.
 JIANG Yueqing.Combinational Application of Well Logging Data in Detecting Casing Leakage in Horizontal Wells[J].Petroleum Tubular Goods & Instruments,2016,(03):80.
[3]宋执武,陈鹏举,高德利,等.“上提下冲”下套管作业方法的力学分析[J].石油管材与仪器,2016,(06):45.
 SONG Zhiwu,CHEN Pengju,GAO Deli,et al.Mechanics Analysis of “Lift and Free Fall” Casing Running Method[J].Petroleum Tubular Goods & Instruments,2016,(03):45.
[4]尹国平,刘恒,邹岳元,等.生产测井阵列成像仪在水平井的应用[J].石油管材与仪器,2016,(06):59.
 YIN Guoping,LIU Heng,ZOU Yueyuan,et al.Application of Array Image Tools of Production Logging in Horizontal Wells[J].Petroleum Tubular Goods & Instruments,2016,(03):59.
[5]郑占树,吴依东,贾明宾.水平井湿接头的改进[J].石油管材与仪器,2017,3(03):96.[doi:10.19459/j.cnki.61-1500/te.2017.03.024]
 ZHENG Zhanshu,WU Yidong,JIA Mingbin.Improvement of Wetconnector Used in Horizontal Wells[J].Petroleum Tubular Goods & Instruments,2017,3(03):96.[doi:10.19459/j.cnki.61-1500/te.2017.03.024]
[6]张必波,孙刚,王振.一种伸缩测量装置的研制[J].石油管材与仪器,2017,3(06):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
 ZHANG Bibo,SUN Gang,WANG Zhen.Development of a Measuring Tool for Flex Quantity[J].Petroleum Tubular Goods & Instruments,2017,3(03):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
[7]吕俊涛,董建华,欧昊达,等.PNST-3D剩余油饱和度测井仪的设计[J].石油管材与仪器,2018,4(01):29.[doi:10.19459/j.cnki.61-1500/te.2018.01.008]
 LYU Juntao,DONG Jianhua,OU Haoda,et al.Design of PNST3D Residual Oil Saturation Tool[J].Petroleum Tubular Goods & Instruments,2018,4(03):29.[doi:10.19459/j.cnki.61-1500/te.2018.01.008]
[8]郭道连.青海油田水平井产液剖面测井资料的分析及应用[J].石油管材与仪器,2018,4(01):94.[doi:10.19459/j.cnki.61-1500/te.2018.01.024]
 GUO Daolian.Analysis and Application of Production Profile Logging Data of Horizontal Well in Qinghai Oilfield[J].Petroleum Tubular Goods & Instruments,2018,4(03):94.[doi:10.19459/j.cnki.61-1500/te.2018.01.024]
[9]谭政,倪秀敏.持水率计在水平测井工艺中的改进[J].石油管材与仪器,2018,4(02):29.[doi:10.19459/j.cnki.61-1500/te.2018.02.008]
 TAN Zheng,NI Xiumin.Technology Improvement of Water Holdup Meter in Horizontal Logging[J].Petroleum Tubular Goods & Instruments,2018,4(03):29.[doi:10.19459/j.cnki.61-1500/te.2018.02.008]
[10]刘晓磊.基于阵列探针的水平井油水两相流成像测井方法研究[J].石油管材与仪器,2018,4(02):70.[doi:10.19459/j.cnki.61-1500/te.2018.02.019]
 LIU Xiaolei.Approach to Oil and Water Twophase Flow Imaging Logging for Horizontal Wells Based on Array Probe[J].Petroleum Tubular Goods & Instruments,2018,4(03):70.[doi:10.19459/j.cnki.61-1500/te.2018.02.019]

备注/Memo

备注/Memo:
第一作者简介:孙鹏,男,1983年生,工程师,2015年毕业于东北石油大学石油工程专业,现主要从事试采测试与管材仪器领域工作。E-mail:zhihuonatie@126.com
更新日期/Last Update: 2019-06-25